For Windows 2000 - Oki ES2426dn Software Installation Manual

USB
Install Printer Software

for Windows 2000

Install the PostScript Driver
□
Make sure the USB cable is connected to your printer
and PC and your printer is turned OFF.
□
Insert the driver CD supplied with your printer into
your CD-ROM drive. The CD will autorun.
If it doesn't, click Start → Run → Browse.
Browse to your CD-ROM drive and double-click
Install.exe, click OK.
□
The License Agreement appears. Click Next.
□
The Menu Installer Software Installation screen
appears. Select your language.
□
Select Custom Install to install the printer driver and
the software utilities. To install only the printer driver,
select Quick Install and skip the next step.
□
Click the Printer Driver Installer button.
□
Click Local printer. Click Next.
□
Select the USB port. Click Next.
□
Select your printer model and PostScript (PS)
emulation type (the default setting). Click Next. The
printer driver installs.
□
Connect cable screen displays. Click Finish.
□
Switch your printer ON.
□
Click Finish.
Print a Test Page
□
Click Start → Settings → Printers.
□
Right-click your OKI printer model.
□
Click Properties.
□
Click the Print Test Page button.
Install Printer Software Utilities
Return to the Menu Installer and click the Productivity
Software button. Install each utility you want following the
on-screen instructions.
To access the utility programs from your desktop, click
Start → Programs → OkiData.
Activating the Duplex Unit, Internal Hard
Drive and 0ptional Paper Trays
If your printer has a duplex unit or internal hard drive or
optional paper trays, you must enter the driver and activate
them. See page 6 for instructions on how to do this.
To Install the PCL Driver as Well
□
If you have installed the PostScript Driver, you must
reboot your system.
□
Make sure the printer is powered OFF.
□
Follow the instructions to install the PostScript driver.
When prompted to select a port you want your printer
to use, select LPT1 temporarily.
□
When prompted to select the printer emulation type,
select PCL.
□
When installation is complete, click Finish.
To enable the USB port:
□
Click Start → Settings → Printers.
□
Right click the printer icon, then click Properties.
□
On the Ports tab, select USB001 port in the Print to
the following port list.
□
Click OK, then close the Printers dialog box.
To print a test page:
□
Click the General Tab, click the Print Test Page button.
11