Changing The Display Mode; Clock Mode - Esoteric X-03 Owner's Manual

Changing the display mode

During playback, it is possible to change the display as shown
here.
< The DISPLAY button doesn't work during programmed
playback.
Currently playing track
Time remaining for current track
18
Elapsed time of current track
Total elapsed time (disc)
Total time remaining (disc)

Clock Mode

For highly accurate playback, you can use the word clock
(sync) output of an external unit such as the Esoteric G-25U,
D-70 or G-0s to synchronize your whole audio system.
Use the CLOCK MODE (main unit) button to switch
between Word ON and Word OFF.
When the unit is synchronizing to the external clock, the ring
surrounding the button flashes. When it is locked, the button
lights.
< Note that the sync connection should be made before the
CLOCK MODE button is pressed. If no valid word sync signal
is received, the display shows "No Word!".
< This unit can accept and synchronize to the following
frequencies received from external devices:
44.1kHz, 88.2kHz, 100kHz, 176.4kHz