Emergency Power Off - HP Surestore XP256 - Disk Array Manual

Item Name
7 EMERGENCY POWER-OFF
(EPO)
8 STORAGE CLUSTER 1,
CHANNEL A–H ENABLE
9 STORAGE CLUSTER 1,
CHANNEL A–H,
ENABLE/REMOTE/DISABLE
10 STORAGE CLUSTER 2,
CHANNEL A–H ENABLE
11 STORAGE CLUSTER 2,
CHANNEL A–H,
ENABLE/REMOTE/DISABLE
12 STORAGE CLUSTER 1,
FORCE OFFLINE
26
Description Function
1-Way locking For emergency use only. Shuts down
switch power to the entire disk array. Once
pulled, this switch locks into position and
must be reset by an HP service
representative.
Green LED ON indicates the cable and terminator are
properly connected to the port and the
path to the host is ready and enabled.
OFF indicates:
1) The logical unit is not configured for the
port.
2) The cable or terminator is not properly
connected.
3) The port is not enabled.
3-Way switch This switch is not used in SCSI or Fibre
Channel configurations.
Green LED ON indicates the cable and terminator are
properly connected to the port and the
path to the host is ready and enabled.
OFF indicates:
1) The logical unit is not configured for the
port.
2) The cable or terminator is not properly
connected.
3) The port is not enabled.
3-Way switch This switch is not used in SCSI or Fibre
Channel configurations.
2-Way switch This switch is not used in SCSI or Fibre
Channel configurations.
FRQWLQXHG
FRQWLQXHG