Playing A Disc; Configuring Autoplay - HP Dv3-2150us - Pavilion Entertainment - Core 2 Duo 2.1 GHz User Manual

Playing a disc

1. Turn on the computer.
2. Press the release button (1) on the optical drive bezel to release the disc tray.
3. Pull out the tray (2).
4. Hold the disc by the edges to avoid touching the flat surfaces, and position the disc label-side up
over the tray spindle.
NOTE:
5. Gently press the disc (3) down onto the tray spindle until the disc snaps into place.
6. Close the disc tray.
7. If the AutoPlay dialog box opens, follow these steps:
a. Under the topic Choose what happens when you insert each type of media, select the
check box for the media you want to play: audio CD, DVD movie, software or games, or
pictures.
b. Select the check box for the software you want to use to perform this task.
NOTE: After you insert a disc, a short pause is normal.

Configuring AutoPlay

AutoPlay allows you to specify a specific program for a variety of media types: audio CD (used to record
and play music), DVD movie, software and games, pictures, or blank CD or DVD (to burn a disc).
1. Select Start > Control Panel > Play CDs or other media automatically.
2. Confirm that the Use AutoPlay for all media and devices check box at the upper left of the
computer screen is selected.
3. Click Choose a default, and then select one of the available options for each media type listed.
4. Click Save to confirm your selections.
If the tray is not fully accessible, tilt the disc carefully to position it over the spindle.
Playing a disc 17