HP StorageWorks XP10000 - Disk Array Configuration Manual page 24

Error condition
A file system is not mounted after re-
booting.
The disk array performs a self reboot
because the disk array was busy or it
logged a panic message.
The disk array responds "Not Ready"
or the disk array has displayed "Not
Ready" and timed out.
The host detects a parity error.
The host hangs or devices are declared
and the host hangs.
24 Troubleshooting
Recommended action
Verify that the host was restarted correctly.
Verify that the file system attributes are correct.
Reboot the host.
Contact HP.
Check the FCA and make sure it was installed properly.
Reboot the host.
Make sure there are no duplicate disk array TIDs and that disk array
TIDs do not conflict with any host TIDs.