HP StorageWorks XP10000 - Disk Array Configuration Manual page 25

1. Mount the file system. Enter:
mount mount_point_name
Example
# mount /vg01
2. Repeat step 1 for each new file system.
3. Use the df command to verify the size of the file systems. The capacity is listed in 512-byte
blocks. To list capacity in 1024-byte blocks, use the df
Example
# df
File system 512-blocks
/dev/hd4
/dev/hd2
/dev/hd9var
/dev/hd3
/dev/hd1
/dev/lv00
/dev/lv01
/dev/lv02 14401536 13949392
4. Verify that the file system is usable by performing some basic operations (for example, file creation,
copying, and deletion) on each logical device.
Example
# cd /hp00
# cp /smit.log /hp00/smit.log.back1
# ls -l hp00
rw-rw-rw- 1
# cp smit.log.back1 smit.log.back2
# ls -l
-rw-rw-rw- 1
-rw-rw-rw- 1
# rm smit.log.back1
# rm smit.log.back2
free %Used Iused %Iused Mounted on
8192 3176
1024000 551448
8192 5512
24576 11608
8192 7840
4792320 4602128
4792320 4602128
root system 375982 Nov 30 17:25 smit.log.back1
root system 375982 Nov 30 17:25 smit.log.back1
root system 375982 Nov 30 17:28 smit.log.back2
XP Disk Array Configuration Guide for IBM AIX
k command.
61% 652 31% /
46% 6997 5% /usr
32% 66 6% /var
52% 38 0% /tmp
4% 17 1% /home
4% 16 1% /VG00 (OPEN-3)
4% 16 1% /VG01 (OPEN-3)
4% 16 1% /VG02 (OPEN-9)
25