HP StorageWorks XP10000 - Disk Array Configuration Manual page 18

5. Repeat these steps for each OPEN-x device on the disk array.
TIP:
The lsattr command also shows other useful information, such as LUN ID of the mapped
LDEV, worldwide name of the disk array FC port, and N-Port ID.
Another useful command for determining the slot position and port worldwide name of the
FCA is the lscfg
Changing the device parameters using SMIT
1. Start SMIT. (Optional) For an ASCII session, use the smit
2. Select Devices.
Example
System Management
Move cursor to desired item and press Enter.
Software Installation and Maintenance
Software License Management
Devices
System Storage Management (Physical & Logical Storage)
Security & Users
Communications Applications and Services
Print Spooling
Problem Determination
Performance & Resource Scheduling
System Environments
Processes & Subsystems
Applications
Using SMIT (information only)
3. Select Fixed Disk.
4. Select Change/Show Characteristics of a Disk.
5. Select the desired device from the Disk menu.
The Change/Show Characteristics of a Disk screen for that device is displayed.
18 Installing and configuring AIX for the XP disk array
l hdiskx command.
v
C command.