Download  Print this page

Canon PIXMA MG3222 series Getting Started Manual Page 2

Inkjet photo all-in-one.
Hide thumbs


Check that the Head Cover has
opened automatically.
Asegúrese de que la cubierta
del cabezal se ha abierto
2 2
Lower the Ink Cartridge Lock Lever.
The left is where the Color FINE Cartridge is to be installed and the right is where the Black FINE Cartridge is to be
2 2
Baje la palanca de bloqueo del cartucho de tinta.
A la izquierda debe instalarse el cartucho FINE (FINE Cartridge) de color y a la derecha debe instalarse el cartucho
FINE (FINE Cartridge) negro.
7 7
Check that this screen is displayed.
7 7
Compruebe si aparece esta pantalla.
1 1
Open the Paper Output Tray and
the Paper Output Cover.
1 1
Abra la bandeja de salida del papel
y la tapa de salida del papel.
If the Head Cover is closed, close the
Paper Output Cover and open it again
to open the Head Cover.
Si la cubierta del cabezal está cerrada,
cierre la tapa de salida del papel y
vuelva a abrirla para abrir la cubierta
del cabezal.
3 3
Unpack the FINE Cartridge, then
remove the protective tape.
Be careful of ink on the protective tape.
3 3
Desembale el cartucho FINE
(FINE Cartridge) y retire la cinta
Tenga cuidado con la tinta de la cinta
Do not touch!
¡No tocar!
Insert it straight until it stops.
Insértelo recto hasta que se detenga.
If the Alarm lamp is lit
orange, check that the
FINE Cartridges are
installed correctly.
The screen turns off if the
machine is not operated
for about 5 minutes. To
restore the display, press
any button (except the ON
button) on the Operation
4 4
Insert the FINE Cartridge until it
Do not knock it against the sides!
4 4
Inserte el cartucho FINE (FINE
Cartridge) hasta que se detenga.
¡No lo golpee contra los lados!
5 5
Lift the Ink Cartridge Lock Lever.
5 5
Levante la palanca de bloqueo del
cartucho de tinta.
6 6
to install the other
FINE Cartridge.
6 6
Repita de
para instalar
el otro cartucho FINE (FINE
7 7
Close the Paper Output Cover.
Wait for about 20 seconds until this
screen is displayed, then proceed.
7 7
Cierre la tapa de salida del papel.
Espere aproximadamente 20 segundos
hasta que aparezca esta pantalla y continúe.
Si la luz de Alarma
(Alarm) está encendida
en naranja, compruebe
que los cartuchos FINE
(FINE Cartridges) estén
instalados correctamente.
Cuando el equipo no
se utiliza durante unos
5 minutos, la pantalla
se desconecta. Para
reactivarla, pulse cualquier
botón (excepto el botón
ACTIVADO (ON)) en el
panel de control.


Table of Contents

   Related Manuals for Canon PIXMA MG3222 series

This manual is also suitable for:

Pixma mg3220 series

Comments to this Manuals

Symbols: 0
Latest comments:
  • Trudy Feb 15, 2016 10:35:
    How do you aline the ink cartridges My ink is very blurry
  • #unknown Jan 05, 2015 04:30:
    I carnt work out how to scan a document with more than one page so i can save all the pages as one document.
  • shubie42 Oct 06, 2014 08:07:
    It doesn't tell me how to connect the printer to a WiFi.can you send informatio​n on how to do this?