Connecting The Power Cord - Dell PowerEdge UPS 500T Getting Started Manual

Connecting the Power Cord

Verify that the power input to the UPS has adequate upstream overcurrent protection:
10
Table 1. Minimum Upstream Circuit Breaker Rating
UPS Output Power
500W
1000W
1500W (at 100V)
1920W
Plug the UPS power cord into a power outlet.
11
NOTE: For 1920/1500W models.
markings that can be used in Taiwan and Japan, another cord is for regions other than Taiwan and Japan.
8
|
Installation and Startup
120V 208V
15A —
15A —
20A —
There are two power cords in the box, one with BSMI and PSE certified
230V
15A
15A
15A