Setup And Configuration Overview - HP StorageWorks NAS b2000 - v2 Quick Start Manual

Setup and Configuration Overview

Setting up systems is a well-defined process. This section is intended as an
overview of the process, not a detailed list of step-by-step instructions.
Step-by-step procedures are documented in the administration guide. Some of the
steps are driven by wizards within the WebUI. In either type of setup, it is
important to read all of the supplied documentation before starting. Relevant
documents include:
■
■
■
The following describes how to configure the NAS b2000 v2.
1. Configure the NAS device using Chapters 2 and 3 from this guide.
2. This is an optional step. Install NIC teaming software and create fault
3. This is a recommended step. Place the NAS device into an Active Directory
4. With the system online, create the arrays and logical volumes (LUNs) using
5. Using Logical Disk Manager, write signatures to the disks, mark them as
6. This is an optional step. Enable protocols such as NFS sharing, NCP, and/or
7. This is an optional step. Create shares corresponding to the protocols
8. Activate the iLO port by locating the Integrated Lights-Out Advanced Pack
9. Read the remaining sections of the administration guide.
NAS b2000 v2 Quick Start Guide
HP StorageWorks NAS b2000 v2 Administration Guide
HP StorageWorks NAS b2000 v2 Quick Reference and Rack Installation
Guide
HP StorageWorks NAS b2000 v2 Release Notes
tolerant or load-balanced network ports. Follow the recommendations found
in this guide and in the administration guide.
or Windows NT 4.0 domain for ease of manageability.
ACU one at a time so that they can be identified easily in Device Manager.
See the procedure in the storage management section of the administration
guide.
basic or dynamic, create corresponding partitions, extended partitions or
volumes, assign drive letters or mount points, and format the drives. See the
LDM online help for full details on this procedure.
AppleTalk. See the administration guide for this procedure in detail.
mentioned in the previous steps. Grant access rights to the shares.
License Installation Card and following the instructions enclosed with this
system.
Product Overview
19