Ericsson R310s User Manual page 37

4. Enter the name that you want to associate with the
phone number and code and press
5. Press to save.
Y E S
If you want to save the number in a different position
than the one suggested, see "Saving a Number Together
with a Name" on page 31.
To make a call with tone signal codes, proceed as described
in "Calling a Number Saved In the Phone Book" on page
32. When you make the call, the phone dials the number,
waits until the call is answered and then sends the code. If
you insert another pause and another code, it pauses again,
sends the next code and so on.
To save codes only
1. Scroll to , ,
Y E S
.
Y E S
2. Enter the code followed by a # and if required, a pause,
another code and so on.
3. Press .
Y E S
4. Enter a name that you want to associate with your codes
and press .
Y E S
5. Press to save.
Y E S
During a call, you can retrieve these codes from the phone
book and send them.
To send the codes during a call
1. Scroll to , ,
Y E S
2. Enter the name (or first few letters) or position number
of your codes and press
Y E S
3. Press to send the codes.
Y E S
Groups
The phone allows you to create groups of phone book
entries. In this way you can send a text message to several
recipients at the same time. See "Text Messages (SMS)" on
page 53.
36
.
Y E S
, , ,
Y E S
, .
Y E S
.