Honda Pilot Owner's Manual page 259

Main Menu
Replacing a Front Turn Signal
Bulb
BULB
1. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
2. To remove the front turn signal
bulb, push it in slightly and turn it
counterclockwise.
3. Install the new bulb into the
socket and reinstall it.
Table Of Contents
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
Replacing a Parking Light/Front
Side Marker Light Bulbs
SOCKET
1. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
SOCKET
BULB
2008 Pilot
2. To remove a bulb, pull it straight
out of its socket.
3. Install the new bulb into the
socket.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
Lights
255