Advertisement
This option is displayed only when an Eye-Fi memory card (available separately from
third-party
suppliers) is inserted
in the camera. Choose Enable to upload
photographs
to a preselected
destination.
Note that pictures will not be uploaded
if
signal strength
is insufficient.
Observe all local laws concerning
wireless devices and choose Disable where
wireless devices are prohibited.
When an Eye-Fi card is inserted, its status is indicated
by an icon
in the information
display:
• _: Eye-Fi upload disabled.
• _: Eye-Fi upload enabled but no pictures available for upload.
• _ (static): Eye-Fi upload enabled; waiting
to begin upload.
• _ (animated):
Eye-Fi upload enabled; uploading
data.
_: Disable
selected for Eye-Fi upload but camera unable to turn card off; see
"Eye-Fi Cards;' below.
[I_ Eye-Fi Cards
Eye-Fi cards may emit wireless signals when Disable is selected.
If a warning
is displayed
in
the monitor
(_ 222), turn the camera offand
remove the card.
The camera can be used to turn Eye-Fi cards on and off, but may not support
other Eye-Fi
functions.
Any support
inquires
should be directed
to the manufacturer.
[]
Supported
Eye-Fi Cards
As of March 2009, the following
2 GB Eye-Fi cards can be used: Eye-Fi Card, Eye-Fi Home,
Eye-Fi Share, and Eye-Fi Explore.
Eye-Fi cards are for use only in the country
of purchase.
View the current camera firmware version.
173
Advertisement
