Advertisement
Choose the flash mode for the built-in flash in P,S,A, and M modes.
Description
_T°-
Flash output
is adjusted
automatically
in response to shooting
conditions.
Choose a flash level between
Full and 1/32
(1/32
Of full power).
At full power,
the built-in
flash has a Guide Number of 18/59 (m/ft., ISO 200, 20 °C/68 °F).
[]
Manual
A I_ icon blinks in the viewfinder
and information
display when
Manual
is selected and the flash is raised.
[]
The SB-400
When an optional
SB-400 flash unit is attached
and turned
on,
Custom Setting el changes to Optional
flash, allowing
the flash
control
mode for the SB-400 to be selected from TTI. and Manual.
[]
Flash Control
The following
types of flash control are supported
when a CPU lens is used in combination
with the built-in
flash or optional
SB-900, SB-800, SB-600, or SB-400 flash units (_ 70, 198).
• i-TTLBalanced Fill-Flash for Digital SLR:Flash output is adjusted
for a natural balance
between
the main subject and the background.
• Standardi-TTLFill-Flash for Digital SLR:Flash output
is adjusted
for the main subject; the
brightness
of the background
is not taken into account.
Recommended
for shots in which
the main subject is emphasized
at the expense
of background
details, or when exposure
compensation
is used.
Standard
i-TTL flash control is used with spot metering
or when selected with the optional
flash unit. i-TTL balanced fill-flash for digital
SLR is used in all other cases.
Choose the setting (exposure, Active D-Lighting,
or white balance) varied when
bracketing
is in effect (P,S,A, and M modes only; see page 103).
162
Advertisement
