Panasonic Palmcoder PV-D407 Operating Instructions Manual page 33

You can choose to have the Tally lamp come on or stay off during Motion Security
recording. The Palmcorder is set to _[__from the factory.
Before you begin...
. Connect the Patmcorderto a power source.
* Insert a cassette with record tab (see page 10),
Continue holding down the
SECURITY MODE button before and
after turning the POWER switch to
CAMERA until the SECURITY MODE
menu screen is displayed.
Press UP A or DOWN V to select
I-*ll_ llil_r_ld [olll
DISPLAY
I - - - _3tf_TY tdl_:)E. *. l
/ r/e.LY LAMPOFF /
_: _ v/IIKEY
if.,!nii'i l!'_*lT_l--J[_
Tally Lamp comes on during Motien
Security recording,
IriP';1 ulms",_ _ l-.l[o_
Tally Lamp stays off during Motion
Security recording.
Press the DISPLAY button to set your
selection and exit this screen.
33