Panasonic Palmcoder PV-D407 Operating Instructions Manual page 31

This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
!
I ([Digital EIS ON_
" _oo O
Before you begin...
• Set the POWER switchto CAMERA.
Press the EIS button to activate the
Digital E.I.S. function, ("EIS" will
appear in the EVF.)
• The image in the EVF will be
enlarged slightly and the shutter
speed will automatically adjust from
1/80 to 1/250 according to the
brightness of the subject.
Press the EIS button again to cancel.
• You may also use the High Speed
Shutter function (from 1/100 to 1/
10000). The shutter speed you select
remains active even after you cancel
the Digital E.].S. function.
• Be sure that the Digital EJ.S. is
turned off when not in use.
Digital
E.I.S. may not function
when...
• Palmcorder movement is too ex-
treme.
• recording a subject with distinct
horizontal or vertical stripes.
• recording in low light situations,
• EIS indicator flashes when the light
level is inadequate.
• recording a subject under intense
fluorescent light.
• recording a scene with very fast
motions,
This special effect feature ailows you to change
the picture from a positive to a negative image.
Before you begin...
• Set the POWER switchto CAMERA.
Press NEGtPOS to view or record a
negative image.
Press again for normal recording.
31