Panasonic Palmcoder PV-D407 Operating Instructions Manual page 20

Tally Lamp
TAPE
EJECT
Before you begin...
• Connect the Palmcorder to a power source,
• Insert a cassette with record lab (see page 10).
Set the POWER switch to CAMERA.
The built-in Lens Cover opens.
EVF
Record/Pause
mode.
With the Viewfinder Eye Cup
against your eye, adjust the Vision
Adjustment Control to your eye-
sight.
Slide the TAPE SPEED Selector
to SP or SLP (refer to page 10).
WARNING:
• Do not leave the Palmcorder with the EVF
aimed directly st the sun as this may cause
damage to the internal parts of the EVF.
Press RECORD!PAUSE to start
recording.
The Tally Lamp and REC Indicator are
lit during recording.
Press the RECORD/PAUSE again to
pause the recording.
Set the Power switch to OFF after
recording is finished.
• To remove the cassette
In Record/Pausemode, slide the TAPE EJECT
switch (refer to page 10).
• When your PaJmcorder is aimed at excessively
bright objects, or bright lights, a vertical bar
may appear in the picture. This is a normal
characleristic of the CCD pick-up device. Try
to avoid this when possible.
2O