Table of Contents
Advertisement
With a PC
• Connect
this unit tothe PC after the software
applications
are installed.
• Remove
the supplied
CD-ROM
from your PC.
O
USB cable (supplied)
• Insert the plugs as far as they will go.
1
Connect
this unit to the AC adaptor.
• It is possible to use the unit connected to the PC with the batteries only, but you will not be
able to write data into the unit. Use the AC adaptor to free you from worrying about the
battery running down.
• Connect with the AC adaptor when using the Conversion Assist Function.
2
Turn on the unit.
• This function is available in all modes.
3
Connect
this unit to a PC.
• The USB function selection screen will appear.
4
Touch
[PC] on the screen
of this unit.
• The Smart Wizard Screen is automatically displayed when HD Writer AE 3.0 is installed.
• This unit is automatically recognized as an external drive of the PC. (-) 128)
• When you select an option other than [PC], reconnect the USB cable.
• When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
126
VQT3K35
Advertisement
Table of Contents
