Table of Contents
Advertisement
2
Touch [RECORDER] on the screen of this unit.
• When
you select
an option
other than [RECORDER],
reconnect
the USB cable.
• When
using the battery, the LCD monitor turns off after about 5 seconds.
Touch the screen
to turn the LCD monitor
on.
3
Dubbing through operations on the Blu-ray disc recorder or high-
definition (AVCHD) compatible DVD recorder.
• When
the unit is accessing
the SD card, card access
icon ( _
) appears
on the unit
screen
or the access
lamp is on.
• Be careful
not to disconnect
the USB cable, AC adaptor
or battery
while
the unit is
accessing
the media,
as this may result in the loss of recorded
content.
• Do not use any other USB cables except
the supplied
one. (Operation
is not guaranteed
with any other USB cables.)
• For details
on dubbing
and playback
methods,
read the operating
instructions
of the
Blu-ray disc recorder
or DVD recorder.
• When
you connect
the unit to a Blu-ray disc recorder,
a dubbing
operations
screen may
appear
on the television
connected
to the Blu-ray
disc recorder.
In this case as well,
perform
the operations
of steps
1 to 3.
• You cannot change
the mode of the unit or turn off the unit while
it is connected
to a Blu-ray
disc recorder
or DVD recorder.
Disconnect
the USB cable before performing
either of these
operations.
• If the battery
runs down during dubbing,
a message
will appear.
Operate
the Blu-ray
disc
recorder
to cancel
the dubbing.
114
VQT3K35
Advertisement
Table of Contents
