Table of Contents
Advertisement
•
Dubbing using equipment without an SD card slot or a USB terminal,
or using a video device
You can dub by connecting
an AV multi cable.
• Images
are dubbed
in standard
quality.
• Use the AC adaptor
to free you from worrying
about the battery running
down.
Change the video input on the video
device and TV that this unit is
connected to.
• The channel
set will differ depending
on the
terminal
to which the unit is connected.
• See the operating
instructions
of the video
device
for details.
• Insert the plugs as far as they will go.
• Do not use any other AV multi cables
except
the supplied
one.
O
AV multi cable (supplied)
1
Connect this unit to a video device and then change the mode to
[_.
• If the unit is connected
to a video device using an AV multi cable, the screen of the unit will
not display
images
when
in play back mode.
Check on the TV screen
instead.
2
start playback on this unit.
3
start recording on the connected device.
• To stop recording
(dubbing),
stop playback
on this unit after stopping
recording
on the
recorder.
• If the date and time display
and function
indication
are not wanted,
cancel
them before
dubbing.
(-) 41)
If the dubbed
images
are played
back on a wide-screen
TV, the images
may be stretched
vertically.
In this case,
refer to the operating
instruction
for the device
you are connecting
to or read
the operating
instructions
of the wide-screen
TV and set the aspect
ratio to 16:9.
85
VQT3J95
Advertisement
Chapters
Table of Contents
