Table of Contents
Advertisement
Problem
'
Checkpoints
Scenes
cannot
be
• Release
the protect
setting.
(-> 73)
deleted.
• Any scenes/still
pictures
where
the thumbnails
are
displayed
as _
cannot be deleted,
if the scenes/still
pictures
are unnecessary,
format the media to erase the
data. (-> 44) Please
be aware
that if a media is formatted
then all the data recorded
on the media is erased
and
cannot
be recovered.
Back up important data on a PC,
disc etc.
kvAvd;E
fl _;h"t'_'l ,'T " L'_"_
L"!"L',_
_
Problem
'
Check
points
Video
or audio
is not
output
even though
it is
connected
to TV
correctly.
The images
are
squeezed
horizontally.
If the SD card
is inserted
in another
device,
it is
not recognized.
When
connected
by the
USB cable, this unit is
not detected
by the other
devices.
VlERA
Link does
not
work.
• Please
read the operating
instructions
of your TV and
select
the channel
that matches
the input used for the
connection.
• Change
the [TV ASPECT]
setting
to match the aspect
ratio of the TV. (-,) 76)
• Change
the setting
of the unit depending
on the cable
connecting
to the TV. (-,) 77)
• TV screen
is not displayed
during
recording
or when
PRE-REC
is set. Check on the screen
of the unit. Also,
audio
is not output
from the TV during
recording
mode.
• Check that the device
is compatible
with the capacity
or
type of SD card (SD Memory
Card/SDHC
Memory
Card/
SDXC Memory
Card) that you inserted.
Refer to the
operating
instructions
of the device for details.
• When
connected
to other devices
using only the battery,
reconnect
using the AC adaptor.
(Setting
on this unit)
• Connect
with a HDMI
mini cable (optional).
(-) 78)
• Set [VlERA
Link] to [ON]. (-) 78)
• Turn the unit off and then back on again.
(Setting
on other devices)
• If the TV input does not switch
automatically,
switch
the
input using the TV remote
control.
• Check the VlERA
Link setting
on the connected
device.
• Please
refer to the operating
instructions
of the
connected
device.
105
VQT3J95
Advertisement
Chapters
Table of Contents
