Table of Contents
Advertisement
cOPY/Dubbing
_
Motion
pictures or still pictures
recorded
with this unit can be copied
from a built-in
memory
to
an SD card inserted
in this unit.
•
Check the used space of the SD card
It is possible
to check
the used space of the SD card by [MEDIA
STATUS]
(-) 45).
• Depending
on the media condition,
some
remaining
capacity
of the SD card may not be
used.
• If the remaining
capacity
on a single
SD card is not enough,
you can copy to multiple
SD
cards following
the instruction
on the screen.
In this case, the last scene
copied
to an SD
card is automatically
divided
to fit the space on the SD card.
• If you divide the scenes
(-) 71), and copy by scene selection,
it is possible
to copy
matching
the remaining
capacity
of the SD card, or only the necessary
parts.
• If there
is not much remaining
capacity
in the SD card, a confirmation
message
asking
to
copy after deleting
all data on the SD card is displayed.
Be aware that deleted
data cannot
be restored.
1
Change the mode to [].
• Use a sufficiently
charged
battery
or the AC adaptor.
2
Select the menu.
MENU
[COPY]
_)
•
3
Following the screen display, select the desired item using the
cursor button, and press the ENTER button.
• Select
,_
and press the ENTER
button
to return to the previous
screen.
• (When
[SELECT
SCENES]
is selected)
When
you press the ENTER
button, the scene/still
picture is selected
and [_ indication
appears
on the thumbnail.
Press the ENTER
button
again to cancel the operation.
• (When
[SELECT
DATE] is selected)
When
you press the ENTER
button, a date is selected
and surrounded
by red. Press the
ENTER
button
again to cancel
the operation.
• Up to 99 scenes/still
pictures
or 99 dates can be set in succession.
• If 2 or more SD cards are necessary
to copy, change
the card following
the instructions
on
the screen.
4
Press the MENU button when the copy complete message is
displayed.
• The thumbnail
view of the copy destination
is indicated.
I
80
VQT3J95
Advertisement
Chapters
Table of Contents
