Panasonic Palmcoder PalmSight PV-L679 Operating Instructions Manual page 12

Table of Contents

Advertisement

Supplying Power
Power Cable
t
u
IN
_ rPOWER
"C
II
Connect
AC AdaDtor
VCR DC OUT
Lamp
to Camcorder
DC IN with supplied
Plug in AC Adaptor.
j
POWER
Lamp lights.
es:
VCR DC OUT Connector
• AC Adaptor cannot power Camcorder while
charging Battery.
• When not in use, unplug AC Adaptor from AC
outlet. (Adaptor uses 1.2 W of electricity while
plugged in.)
,---
CAUTION:
This unit will operate on 110/120/220/240V
AC. An AC plug adaptor may be
required for voltages other than 120V AC. Please contact either a local or foreign
electrical parts distributor for assistance in selecting an alternate
AC plug.
We recommend
using the accessory power plug adaptor (VJSS0070)
in an area
which has special AC outlets.
t=
j
|tr..
I d =]_i| (_JiLvJil'/o]Koir I(_]
| [e] iP.i III
DC IN
Connector
Cigarette
Lighter
Socket
(12V)
Car Battery
Cord
Cigarette
(optional)
Lighter
Plug
12
1
2
Connect PV-C16 Car Battery_Cord
(optional) to Camcorder DC IN.
A Start engine
first.
B
Plug Car Battery
Cord into
Cigarette
lighter socket.
• If Car Battery cord fuse needs
replacing,
use exact current rating
(in amps).
Notes:
• This cord only works in vehicles equipped
with DC 12V (negative
ground)
battery.
Check with your car/truck dealer. Use
only specified car battery cord.
• To avoid blowing the car battery
cord
fuse, do step 2 in the proper order.
• Running vehicles must be well ventilated.
• When not in use, disconnect cigarette
lighter plug.

Advertisement

Table of Contents
loading

Table of Contents