INSTALLATION
Optional Equipment Connections (Cont.)
VCR and Cable Box Connection
Follow this diagram
when connecting
your television
to both a VCR and a cable box.
Note:
The S-VIDEO connection provides higher quality picture. It overrides other VIDEO
connections. Use INPUT I or 2 AUDIO R and L with S-VIDEO connection.
)OUT
"1
I
VCR
I
I
I
J
TERMINALS ON BACK OF "IV
CABLES NOT SUPPLIED
Note:
The remote control must be programmed with supplied codes to operate the VCR and
cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing
a premium
(scrambled)
cable channel
Procedure
1,
Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2.
Tune the television to Channel 3.
3.
Using the cable box, tune to the premium (scrambled) cable channel you want to view.
Note:
To use special features such as Favorite Channels and Channel Captions (see Special
Features section for more information), ANT! must be selected in the SET UP menu
under Prog Chan (Program Channels).
Recording
a premium
(scrambled)
cable channel
Procedure
1.
Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2.
Press the W/VIDEO
button on the remote control to select the input
VIDEO 2, etc.) connected to your VCR.
3.
Turn the VCR ON.
4.
5.
6.
Note:
(VIDEO 1,
Tune the VCR to Channel 3 or 4, depending on your VCR.
Using your cable box, tune to the premium (scrambled) cable channel you want to
record.
Begin recording.
To view a different channel while recording:
•
Select ANT1 in the SET UP menu under Prog Chan (Program Channel).
•
Press the W/VIDEO
button on the remote control to select FV mode.
•
Tune the television to a television program (except another premium (scrambled)
cable channel).
[]