Table of Contents
Advertisement
OPTIONAL EQUIPMENT
CONNECTIONS
Optional Equipment
Connections
(cont.)
VCR and Cable Box Connection
(Cont.)
Recording
a premium
(scrambled)
cable
channel
Procedure
Select ANT2 in the SET UP menu.
Press the TVNIDEO
button on the remote control to
select
the video
input
(VIDEO
1, VIDEO
2, etc.)
connected to your VCR.
Turn the VCR ON.
Tune the VCR to Channel
3 or 4, depending
on the
switch setting on the back of VCR.
Using your cable box, tune to the premium cable channel
you want to record.
Begin recording.
[3
To view a different channel while recording:
Select ANT1 in the SET UP menu.
Press the TVNIDEO
button on the remote centre] to TV
mode.
Tune
the television
to a program
(except
another
premium cable channel).
Amplifier
Connection
(TO AUDIO AMP)
To listen
through
a separate
stereo
system,
connect
an
external
audio amplifier
TO AUDIO
AMP outputs
on back of
television.
Note:
TO AUDIO AMP terminals cannot be connected directly
to external speakers.
Audio
Adjustments
Select SPEAKERS
ON located in the enscreen AUDIO
menu.
Set amplifier volume to minimum.
Adjust television volume to desired level.
Adjust amplifier volume to match the television.
Select SPEAKERS OFF & VARIABLE AUDIO OUT from
AUDIO menu.
Volume,
mute,
bass,
treble
and
balance
are
now
controlled through the television.
Note:
Select SPEAKERS OFF & FIXED AUDIO OUT to control
audio functions through the external amplifie_
Program
Out Connection
(PROG OUT)
To use the television audio and video with optional equipment,
connect the PROG OUT and TO AUDIO AMP connections on the
back of the television.
;
MONITOR
VCR
0
Note:
ff the ma#) picture signal is DVI er Component
video
#)put, no Program Out function is available.
Procedure
Connect
optional
equipment
to PROG OUT and TO
AUDIO AMP terminals.
PROG OUT display is same as
onscreen
display. See optional equipment
manual for
further instructions for recording and monitoring.
Digital TV - Set-Top Box (DTV-STB)
or DVD
Con nection
This television
is capable
of displaying
1080i and 480p DTV
signals when connected
to a DTV tuner set-top-box
(STB). in
order to view DTV programming, the STB must be connected
to the component
video inputs (Y,PB,PR) of the television.
A
DTV signal must be available
in your area. Select the output of
the STB to either 1080i or 480p.
This television
also utilizes a progressive
scan doubler, which
de-interlaces
the NTSC signal
and progressively
scans the
image. This allows you to sit close to the TV and not see the
thin black horizontal
lines (venetian
blind effect)
associated
with interlaced TV pictures.
Use this diagram to connect the DTV-STB
or DVD player to
the back of your projection television.
Note:
There are two sets of three video lacks, Y, PB, and PR.
Separate component color #)puts provide luminance and
color separation.
Use the L (left) and R (right) audio
#)puts.
Front Control
Panel
The front control
panel can be used to access
menus
and
switch video mode when the remote control is net available.
The ON/OFF indicator LED (red) will be lit when set is on.
OPt_O FR
A second VCR, Camcorder,
a video disc player, video game
equipment
or DSS equipment
can also be connected
to the
video inputs. See the optional equipment
manual for details.
Procedure
Connect equipment to front Audio/Video input jacks.
Press TV/VIDEO button to select VIDEO 4 input mode.
Operate optional equipment
as instructed in equipment
manual.
8o
Advertisement
Table of Contents
