• Use of a tripod is recommended
for recording
with a stable
picture.
• The reception
range for the remote
control
might become
narrow
at the upper side of the
unit, so operate
from the lower side. (-) 50)
• You will hear a sound when the unit is moved
rapidly
with the 3D Conversion
Lens
attached,
but this is not a malfunction.
• When
the adjustment
dial is rotated
too much,
you will hear a "clapping"
sound and the
adjustment
screen will stop moving.
In such a case, rotate the adjustment
dial in the
opposite
direction
until the adjustment
screen
starts moving.
• [ECONOMY]
will not work while you adjust the 3D Conversion
Lens attachment
position.
• When
the 3D Conversion
Lens is attached,
the auto slow shutter
setting
is [AUTO
SLOW
SHTR
(3D)]. The default setting
of [AUTO SLOW
SHTR (3D)] is [ON]. (,_ 75)
• While 3D recording
if moving
the unit fast, the message
is more likely to appear.
•
Removing the 3D Conversion
Lens
Rotate the attachment
screw to UNLOCK
to loosen
and then
remove.
• Place the unit on a stable location
such as a table,
and be
careful
not to drop the 3D Conversion
Lens.
• Be careful not to lose the lens caps.
• When
storing,
always
attach the lens caps to avoid scratching
the protective
glass.
6O
VQT3B18