Waring PRO MG855 Owner's Manual page 6

Motor
Housing
1. Assemble grinder/feeder
head to motor housing.
Feed Screw
2. Insert feed screw into the
grinder/feeder head.
NOTE: Make sure feed screw is
inserted all the way in or cutting
blade will not fit.
Cutting
Blade
3. Assemble cutting blade on the
end of the feed screw with flat
cutting surface facing away
from the feed screw.
Coarse
Cutting
Plate
4. Place the coarse cutting plate
in the grinder/feeder head.
Grinder/Feeder Head
Grinder/Feeder Head
Screw
Ring
5. Tighten screw ring onto the
grinder/feeder head. Use
spanner to secure screw ring.
Pusher
6. Place large die-cast hopper
onto grinder/feeder head.
7. Turn unit on.
8. Using pusher, slowly feed
meat cubes.
NOTE: Meats can be seasoned
before or after grinding.
Cutting
Blade
Coarse
Cutting
Plate
Screw
Ring
9. Once meat has gone through
grinder, turn unit off. Remove
screw ring, coarse cutting
plate and cutting blade.
6
Spanner
Die Cast
Hopper