Assembly - Craftsman 944.627592 Owner's Manual

ASSEMBLY
REMOVE TILLER FROM CRATE
INSERT CABLE CLIP (See Fig. 6)
• Insert plastic cable clip into hole on the back of handle
column. Push cables into clip.
HANDLE
COLUMN
CABLES
CABLE CLIP
• Make sure shift lever indicator is in "N" (neutral) posi-
tion (See Fig. 7)
• Tilt tiller forward by lifting handle
• Rotate tiller handle to the right and pull tiller out of
carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for
shipping purposes. Correct and equal tire pressure is
important for best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• . Handle height may be adjusted to better.suit operator.
(See "TO ADJUST HANDLE HEIGHT" in the Service
and Adjustments section of this manual).
FIG. 6
CONNECT SHIFT ROD (See Fig. 7)
• Insert end of shift into hole of shift lever indicator.
• Insert hairpin clip through hole of shift rod to secure.
SHIFT HAIRPIN SHIFT
CLIP LEVER
ROD _ INDICATOR
FIG. 7
7