Random Play - Sharp QT-CD700W Operation Manual

1
Set the FUNCTION switch to CD. (The
POWER indicator will light up)
2
Open the CD compartment.
3
Place a compact disc on the spindle, label
side up. 8cm (3") discs may be played
without an adaptor.
4
Close the CD compartment.
5
Press the PLAY/PAUSE
start playback from track 1.
6
Turn the VOLUME control to increase or
decrease the volume.
To interrupt playback:
Press the PLAY/PAUSE
I
playback.
Press the PLAY/PAUSE
I
to resume playback.
To stop playback:
7
Press the STOP button.
To listen to the track being played again:
During playback, press the DOWN/ F.REVERSE
4
button.
To move to the beginning of the next track:
During playback, press the UP/ F.FORWARD
¢
button.
Notes:
To skip a number of tracks at one time, press
I
the DOWN/F.REVERSE
¢
WARD button repeatedly until the
desired track number is shown.
To start playing a desired track, press the
I
DOWN/F.REVERSE
¢
WARD button whilst in the stop mode
to select the track number, and then press
the PLAY/PAUSE
To fast forward audibly:
During playback, hold down the UP/F.FOR-
¢
WARD button.
To fast reverse audibly:
During playback, hold down the DOWN/
4
F.REVERSE button.
ENGLISH NEW
Label Side Up
3 8
button to
3 8
button during
3 8
button again
4
or UP/ F.FOR-
4
or UP/F.FOR-
3 8
button.
E-5
5

Random Play

H
Set the function switch to CD
Tracks on one disc can be played in random
order automatically.
Preparation for Random Play
Whilst in the stop
I
mode, press the RAN-
DOM button.
Next press the PLAY/
I
3 8
PAUSE button
to begin random play.
To cancel random play:
7
Press the button.
Notes:
Random play ends when all the tracks on
I
the selected disc are played once.
¢
If you press the button during random
I
play, you can move to the track selected next
by the random operation.
In random play, the CD player will select and
I
play tracks automatically. (You cannot select
the order of the tracks.)
Open CD compartment will cancel the
I
random function.
9/3/04, 2:41 PM
RNDM