Listening to the iPod or iPhone (continued)
DK-AP7P
ENGLISH
■ To insert iPod or iPhone adaptor
1. Insert the iPod or iPhone adaptor into unit and connect your
iPod or iPhone.
iPhone (bottom)
Dock connector
iPhone dock
iPhone connector
Caution:
Unplug all accessories for the iPod or iPhone before inserting it
into the dock.
■ To remove iPod or
iPhone adaptor
Insert the tip of a screwdriver ("-"
type, small) into the adaptor hole
as shown and lift upward to remove.
E-9
iPhone
iPhone adaptor
■ iPod or iPhone playback
1
Press the ON/STAND-BY button to turn the power on.
2
Insert iPod or iPhone unit in the dock of main unit.
3
Press the
button on the iPod unit to start
playback.
For iPod touch and iPhone, playback will automatically
start once the desired file is selected.
iPhone adaptor
■ iPhone playback
●
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately
10 seconds.
●
Incoming calls will pause the playback and iPhone ringtones
will be heard from the main unit speakers only.
●
Once the calls are answered, the conversation can only be
heard through the built-in iPhone speaker. Turn on the iPhone
speaker or undock the iPhone to start conversation.
■ To disconnect iPod or iPhone
Simply remove the iPod or iPhone from the dock. It is safe to do
so even during playback.
iPhone
Need help?
Do you have a question about the DK-AP7P and is the answer not in the manual?
Questions and answers