Table of Contents
Advertisement
TV Set
Bottom
12
POWER switch
Turns the main power
on and off.
7
Infrared sensor window
Receives the infrared wave
from the remote control.
31
31
POWER SAVE indicator
Lights up red when Power Save
mode is on.
35
ON TIMER indicator
Lights up red when the On Timer is set.
12
STANDBY indicator
Power can be turned on by the remote
control when the indicator is lit red.
• Minimal electric power remains consumed even after the main power is turned off with the
switch on the TV set.
Door
21
POWER SAVE sensor
Room brightness sensor.
To open the door
Using the projection located under
the "PULL-OPEN" indication, pull
and lift the door open.
To close the door
Using the projection, lower the door
until closed.
Caution:
• When opening or closing the door,
do not insert your fingers into the
gap between the door and front
panel. This may result in an injury.
MENU/PRESET button
Used for MENU setup.
Tunes the channels.
13
Volume Up/Down buttons
(
/
)
Adjust the volume.
Make adjustments in PRESET.
Channel Up/Down buttons
13
(CH
/ CH
Select the channels.
Tune or set the channels.
45
Audio input terminals (AV-3 IN)
Connects to a camcorder, video
game, etc.
45
Video input terminal (AV-3 IN)
Connects to a camcorder, video game, etc.
45
S-Video input terminal (SAV3)
Connects to a camcorder, video game, etc.
13
Headphone jack ( )
Used to listen to the audio with headphone.
(When using headphone, see
)
13
.)
Power
E 9
Advertisement
Table of Contents
