Table of Contents
Advertisement
Behind the door
/
Behind the door
• Select an appropriate volume so as not to injure your hearing.
• To avoid injuring your hearing, do not put on the headphones before plugging them into the
headphones jack and before the power is turned on.
• The proper impedance for the headphones is 32 ohms.
• Remove the headphones plug from the headphones jack when not using the headphones.
Operating the TV buttons
Simple operation of the TV set
Using
/
Press
to increase volume.
Press
to decrease volume.
Using CH
/ CH
Press CH
, and channels change as
shown below.
1 / 2 / ... / 98 / 99 / AV1 (or SAV1) /
AV2 / AV3 (or SAV3) /COMPONENT /
0 / 1 / 2 ...
Press CH
, and channels change as
shown below.
1 / 0 / COMPONENT / AV3 (or SAV3) /
AV2 / AV1 (or SAV1) / 99 / 98 / ... /
2 / 1 / 0 ...
Using headphones
Insert headphones plug into headphones jack ( ) to listen to audio
with headphones.
• See 32 for headphones volume adjustment and audio selection.
• The audio from the speakers is not turned off.
If you want the audio from the speakers to be turned off, press the Volume
Down button (
).
VOLUME
15
5
PAL
B / G
E 13
Advertisement
Table of Contents
