Copy Functions; Main Screen Of Copy Mode - Sharp AR-M256 Operation Manual

Chapter 2
2

COPY FUNCTIONS

This chapter explains basic copying functions such as normal copying, reduction or enlargement, and exposure
adjustment.

MAIN SCREEN OF COPY MODE

The main screen of copy mode shows messages, keys, and settings that are used for copying. Touch a key to make
a selection. The main screen of copy mode appears when the [COPY] key is pressed (Except when the custom
settings screen appears.).
1
READY TO COPY.
SPECIAL MODES
2-SIDED COPY
OUTPUT
3 4
Message display
1
Status messages are displayed here.
Copy number display
2
Displays the selected number of copies before the
[START] key (
remaining copies after the [START] key (
pressed. A single copy can be made when "0" is
displayed.
[2-SIDED COPY] key (p.27)
3
Touch to open the duplex copy mode setting screen.
[OUTPUT] key (p.35)
4
Touch to select sort, group, staple sort, and other
output settings.
[SPECIAL MODES] key (p.39)
5
Touch to open the special modes selection screen.
Original feed display
6
This appears when an original is placed in the
RSPF.
Paper size display
7
This shows the location of the paper trays, the size of
the paper in the trays. "
there is paper. A paper tray can be touched to change
the paper tray selection.
COPY
ON LINE
PRINT
DATA
SCAN DATA
LINE
FAX
DATA
JOB STATUS CUSTOM SETTINGS
ORIGINAL
A4
A4
A4
A3
5 6 7
) is pressed or the number of
" indicates whether or not
ACC.#-C
2
0
9
AUTO
10
EXPOSURE
11
AUTO A4
12
PAPER SELECT
13
100%
14
COPY RATIO
8
Original size display
8
Displays the original size only when an original is
placed for copying.
Exposure display
9
Displays the icon of the selected exposure type
) is and the exposure scale.
[EXPOSURE] key (p.29)
10
Use this key to adjust the copy exposure.
Paper select display
11
Displays the selected paper size. When auto paper
select mode is selected, "AUTO" appears when
auto paper select mode is selected.
[PAPER SELECT] key (p.22, p.26)
12
Use this key to select the paper size.
Copy ratio display
13
Displays the selected copy ratio.
[COPY RATIO] key (p.31)
3 14
Use this key to select the copy ratio.
The screen will vary depending on the
equipment installed.
21