Finisher (Ar-Fn5A) - Sharp AR-M256 Operation Manual

PERIPHERAL DEVICES AND SUPPLIES

FINISHER (AR-FN5A)

When an optional finisher (AR-FN5A) is installed, the machine can automatically staple the sorted copies. Each
collated set of copies or group of copies can be stacked offset from the previous set. (Offset function p.35)
Part names
Specifications
Tray capacity
Paper size
Offset
Paper sizes that can be
stapled
Stapling capacity
Power supply
Weight
Dimensions
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
Note
changes for product improvement without prior notice. The performance specification figures indicated are
nominal values of production units and there may be some deviations from these values in individual units.
78
Top cover
Top tray
Offset tray
Stapler cover
AR-FN5A
Top tray 100 sheets
Offset tray 1,000 sheets (500 sheets for sizes larger than A4 (8-1/2" x 11"))
Top tray: A5 to A3 (5-1/2" x 8-1/2" to 11" x 17")
Size
Offset tray: B5 to A3 (8-1/2" x 11" to 11" x 17")
Weight 52 g/m
Approx. 27 mm (1")
B5, A4, A4R, B4, A3 (8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 13", 8-1/2" x 14", 11" x 17")
2
30 sheets (80 g/m (21 lbs.))
Drawn from the machine
Approx. 19 kg (42 lbs.)
470 mm (W) x 511 mm (D) x 540 mm (H)
Exit area
(18-33/64" (W) x 20-1/8" (D) x 21-17/64" (H))
562 mm (W) x 444 mm (D) x 109 mm (H)
Stapler compiler
(22-9/64" (W) x 17-31/64" (D) x 4-19/64" (H))
Stapler compiler cover
2 2
to 128 g/m (14 lbs. to 34 lbs.)