OPTIONAL EQUIPMENT
Using the AR-D33 with the printer function
To use the AR-D33 with the printer function, follow these steps to adjust the settings
in the printer driver.
Note
1
Click the "start" button.
2
Click "Control Panel", select "Printer and Other Hardware", and
then click "Printer and Faxes".
• On Windows Vista, click "Control Panel", and then click "Printer".
• On Windows 98/Me/2000, select "Setting" and click "Printers".
3
Click the "SHARP AR-XXXX" printer driver icon and from the
"File" menu select "Properties".
• On Windows Vista, from the "Organize" menu select "Properties".
• On Windows 98/Me, click the "SHARP AR-XXXX" printer driver icon,
select "Properties" from the "File" menu, and then click the "Setup" tab.
4
Click the "Configuration" tab.
5
Select "Two trays" for "Input tray
option", and click "OK".
The printer driver closes. This completes
the settings needed to use the AR-D33.
Interface cable
Please purchase the appropriate cable for your computer.
USB interface cable
USB cable that supports USB 2.0.
88
The printer driver cannot be set for use with the AR-D33 when opened
from the application.