Connecting To A Component-To-Vga Video Source - Epson PowerLite S11 User Manual
Epson projector user manual
Hide thumbs
Also See for PowerLite S11:
- Declaration of conformity (4 pages) ,
- Brochure & specs (4 pages) ,
- Quick setup (4 pages)
Table of Contents
Advertisement
1. Connect the HDMI cable to your video source's HDMI output port.
2. Connect the other end to the projector's HDMI port.
PowerLite X12
PowerLite X15
Parent topic:
Connecting to a Component-to-VGA Video Source
If your video source has component video ports, you can connect it to the projector using a component-
to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along
with a component video cable.
1. Connect the component connectors to your video source's color-coded component video output
ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors
to your component video cable.
2. Connect the VGA connector to the projector's Computer port.
PowerLite S11/X12
Connecting to Video Sources
34
Hide quick links:
Advertisement
Table of Contents
