Table of Contents
Advertisement
No sound
• Check that the volume is set to an audible level.
• Make sure you have not switched the sound off accidently.
• Check the connections of the audio connectors, see pages 10 to 13.
Distorted sound
• Check that the appropriate listening mode setting is correct in audio system.
No response from remote control
• Check that the batteries are positioned correctly.
• Change the batteries.
• Operate the remote control within 30˚ angle on either side of the remote control sensor,
up to a distance of approximately 6 meters.
If nothing works
If you have tried the above solutions and nothing seems to work, try switching the player
off and on again. If you still encounter operational problems, unplug the AC power
cord and wait for a few minutes to allow the player to reset itself completely. If none
of these actions is successful, contact your supplier or DVD player repair technician.
Never attempt to repair a defective DVD player yourself.
- 36 -
EN
Advertisement
Table of Contents
