Video Cd Playback - Sharp DV-SV97S(G Operation Manual

VIDEO CD PLAYBACK

Preparations
If the player has been connected to an audio system, turn
it on and then turn on your TV.
Basic Play
1. Press OPERATE.
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray.
Hold the disc without touching either of its surfaces, posi-
tion it with the printed title side facing up, align it with the
guides, and place it in its proper position.
4. Press OPEN/CLOSE ( ).
The disc tray is closed.
For Video CDs without playback control (PBC):
Play starts immediately.
For Video CDs provided with playback control (PBC):
If the disc contains a menu, the menu is displayed on the
screen after a few moments.
Menu Play
This function works only with Video CDs with playback
control (Version 2.0).
Follow the instructions on the menu screen for interactive
operation.
The details differ depending on the disc concerned. Also
refer to the instructions accompanying the disc.
After steps 1 to 4 above the menus are displayed on the
TV screen.
5. Press the number buttons to select the preferred
item.
The player now starts to play the selected item.

NOTE:
• Use +10 to enter two-digit numbers.
• are not used for selecting items for Video
///
CDs.
What is playback control (PBC)?
If a Video CD has "playback control" written on the disc,
it means that particular scenes or information can be
selected for viewing interactively with the TV by using the
menu screen.
Switching PBC On/Off
Press REPEAT when a Video CD with PBC is inserted.
The "Play Mode" box is displayed on the screen.
Select the "Mode" field in the "Play Mode" box and press
SELECT.
Each time this button is pressed, PBC switches On and
Off alternately.

NOTE:
• For Video CDs without PBC, the "Mode" field in the "Play
Mode" box cannot be changed.
• For Video CDs with PBC, you can also use MENU to
switch PBC On and Off.
When the menu continues onto another screen
After step 4, press SKIP/FRAME (
To return to the previous menu screen, press SKIP/FRAME
( ).


NOTE:
• The disc continues to rotate while the menu is displayed
even after the player has finished playing a particular item.
When no further selections are to be played, be sure to
press STOP () to clear the menu display.
For your reference:
When " " is displayed on the screen while a button is
being operated, it means that the player prohibits the cor-
responding operation.
Stopping Play
For Video CDs without PBC or when PBC mode is
"Off ".
Press STOP () twice.
When play is stopped, the player records the point where
STOP () was pressed once (Resume function). Press
PLAY/PAUSE again, and play will resume from this point.
When the tray is opened or STOP () is pressed again,
Resume function will be cleared.
To stop play permanently, press STOP () twice. When
STOP () is pressed once, the message "Press Play Key
To Continue" is displayed on the screen to prompt you
whether to continue play. To stop play press STOP ()
again or you can press PLAY/PAUSE to resume play.
For Video CDs with PBC and when PBC mode is "On".
Press STOP () once.
No Resume function is available.
- 21 -
).

EN