Tv Operation (Channel Selection) - Sharp 28HW-57E Operation Manual

Operation TV
Channel Selection
Channel selector buttons
Select the programme channel number you want to see, using the
channel selector buttons
CH
When you press this buttons the TV set frozen the current program, a
small screen appears within the main TV screen and the list of
programmes appears too.
Press the or
CH
CH
In the small screen you can watch the selected programme.
Note: The channels that are in SKIP mode can't be seen with this
buttons. Use numerical buttons to display these channels.
Single/Double entry selector button
This button selects between one or two digit channel number entry.
0~9 Digit buttons
You can select channels by pressing the 0 ~ 9 digit buttons on the remote control.
(Single digit and double digit entry are available: refer to the Single/Double entry selector).
Flash-back button
Press this button to switch the currently-tuned channel to the previously-tuned channel. Press the button again to switch
back to the currently-tuned channel.
/
CH CH
or .
CH
again to select another program.
Single digit
entry mode
~
Previously
viewed channel
Double digit
entry mode
Currently
viewed channel
11
Previously
SELECTED
viewed
PROGRAM
channel
( still )