Table of Contents
Advertisement
AUDIO CD PLAYBACK
Preparations
If the player has been connected to an audio system, turn
it on.
Basic Play
1. Press OPERATE.
2. Press OPEN/CLOSE ( ) to open the disc tray.
3. Place a disc onto the tray.
Hold the disc without touching either of its surfaces, posi-
tion it with the printed title side facing up, align it with the
guides, and place it in its proper position.
4. Press OPEN/CLOSE ( ).
Play starts.
After operation
When the player is not in use, remove the disc and press
OPERATE to turn off the player.
NOTE:
• If the disc is placed in upside down (and it is a single-sided
disc), the VFD on the player will indicate "NO DISC".
For your reference:
When " " is displayed on the screen while a button is be-
ing operated, it means that the corresponding operation is
prohibited by the player.
Stopping Play
Press STOP () twice.
When play is stopped, the player records the point where
STOP () was pressed once (Resume function). Press
PLAY/PAUSE or SELECT again, and play will resume from
this point. When the tray is opened or STOP () is pressed
again, Resume function will be cleared.
To stop play permanently, press STOP () twice. When
STOP () is pressed once, the message "PRESS PLAY
TO CONTINUE" is displayed on the screen to prompt you
whether to continue play. To stop play press STOP ()
again or you can press PLAY/PAUSE to resume play.
Fast Forward / Reverse
Press SLOW/SEARCH (
on the remote control during playback.
The speed of fast forward or fast reverse changes each
time
or
is pressed.
Press PLAY/PAUSE or SELECT on the remote control to
resume normal play.
NOTE:
• No sound will be heard during fast forward or reverse.
Skip Forward / Backward
Press SKIP/FRAME (
The track is skipped forward or backward each time the
button is pressed.
Pause
Press PLAY/PAUSE once during playback.
Play pauses.
To return to normal play:
Press PLAY/PAUSE or SELECT.
- 24 -
Fast reverse or
Fast forward)
or
) during playback.
EN
Advertisement
Table of Contents
