Table of Contents
Advertisement
Changing Audio Soundtrack Language
It is possible to change the audio language from the one
selected at the initial settings to a different language, if
available.
(This operation works only with discs on which multiple
audio soundtrack languages are recorded.)
Press AUDIO during playback.
Press AUDIO consecutively until the preferred language
is selected.
NOTE:
• When the desired language cannot be found after pressing
AUDIO several times, it means that the language is not
available on the disc.
• When the player is restarted or the disc is changed, the
language selection is automatically changed back to the
initial settings.
• If a language that is not supported by the disc is selected,
the language is automatically set to the disc's default
language.
Viewing from Another Angle
Some DVDs may contain scenes that have been shot si-
multaneously from a number of different angles. For these
discs, the same scenes can be viewed from each of these
different angles using ANGLE.
The number of recorded angles differs depending on the
disc used.
When "ANGLE MARK" in PREFERENCE menu is set to
"ON", "
" is displayed on the screen during playback.
This indicates that the multi-angle scene has just started.
"ANGLE" is also displayed on the player display. From that
moment on, the x
of total angles is played and you can
th
change the viewing angle until the end of the multi-angle
scene.
The "ANGLE MARK" item in the SETUP menu can be used
to display a continuous angle mark on the screen as long
as multi-angle scene is available.
Press ANGLE during playback.
The current angle is changed.
Press ANGLE consecutively until the preferred viewing
angle is selected.
NOTE:
• This function will only work on discs where different angles
have been recorded.
• The viewing angles are shown on the screen. You can
select one of them for viewing.
• If you press ANGLE outside of a multi-angle scene on a
multi-angle title, " " is displayed on the screen. It means
that only one angle is currently available.
Using a DVD Menu
Some DVDs have unique menu structures called DVD
menus. For example, DVDs programmed with complex
content provide guide menus, and those recorded with
various languages provide menus for audio and subtitle
languages. Although the DVD menu content and opera-
tions differ from disc to disc, the following explains basic
operation when this feature is available.
Press TITLE or MENU.
The DVD menu available on the disc is now displayed.
NOTE:
• If you press MENU, the root menu of DVD is displayed.
• If you press TITLE, the menu of the current title is dis-
played.
• MENU and TITLE do not function in Resume mode.
Press
///
Press SELECT.
The selected item is now executed.
You can also use number buttons to select a DVD menu
item. The player will automatically execute the item. To
enter an item number that is more than one digit, press
+10 and then enter the item number.
To resume playback, select an applicable item on the
DVD menu.
NOTE:
• Some DVDs may not contain root and/or title menus.
- 20 -
to select the preferred item.
EN
Advertisement
Table of Contents
