Table of Contents
Advertisement
PLAYING A DISC
Track
There are three ways to begin playback on an Audio CD or
Video CD at a specific Track.
Using the numerical key pad
1
Press the numerical key pad to enter the desired
Track number.
• Playback will start at the selected track.
• For single digit tracks (1-9), press a single number (eg.
track 3, press 3).
• To play track 26, press +10, 2, 6 on the numerical key
pad.
Using the DIRECT SKIP
1
Press DIRECT SKIP.
• The track search display appears.
2
Within 30 seconds, select a desired track number
using the numerical key pad. For single digits
press "0" first.
• Playback will start at the selected track.
Using the SKIP H G
During playback, press SKIP G to move to the next track.
Press it repeatedly to skip subsequent tracks. Press SKIP H
to go back to the beginning of the current track. Press it quickly
and repeatedly to go to the previous tracks.
• Track number will appear briefly on the DVD display panel.
• If SKIP is pressed while the playback is paused, the
playback will be paused again after skipping to the next
track.
NOTE:
• SKIP H G are not available when playback is stopped.
Title / Chapter Search
1
Press
once for the Chapter search,
DIRECT SKIP
twice for the Title search during playback.
/2
2
Enter the desired chapter/title number using the
numerical key pad.
Time Search
DVD
1
During playback, press
(CD: twice) to display the Time Search on the TV
screen.
2
Within 30 seconds, enter a desired disc time using
the numerical key pad.
• Playback will start at the specified time.
CD
VCD
without PBC function
DVD
DVD-RW
VR mode
CD
DVD-RW
VCD
VR mode
without PBC function
three times
DIRECT SKIP
Repeat
• REPEAT are available only during playback.
REPEAT TITLE / CHAPTER
To activate the repeat function, press REPEAT during
playback.
•
The repeat mode changes as described below every time
you press the button.
CHAPTER
(current chapter repeat)
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
REPEAT TRACK
To activate the repeat function, press REPEAT during play-
back.
•
The repeat mode changes as described below every time
you press the button.
TRACK
(current track repeat)
NOTES:
•
The REPEAT setting will be cleared when moving to other track.
•
Repeat playback does not function during A-B REPEAT
playback.
•
Repeat playback is not available when you play the Video CD
with PBC function.
DVD
1
Press A-B REPEAT at your chosen starting point.
•
A- appears briefly on the TV screen.
2
Press A-B REPEAT again at your chosen end
point.
•
A-B appears briefly on the TV screen, and the repeat
sequence begins.
3
To exit the sequence, press A-B REPEAT .
NOTES:
•
The A-B REPEAT
current title (for DVDs), or current track (for audio CDs).
•
A-B REPEAT is not available with some scenes in DVD.
•
To cancel the A point which was set, press CLEAR.
•
A-B REPEAT
playback does not function during title,
chapter, track or all repeat playback.
– 15 –
DVD
DVD-RW
TITLE
(repeat off)
(current title repeat)
CD
ALL
(repeat off)
(entire disc repeat)
A-B REPEAT
CD
DVD-RW
VR mode
section can only be set within the
VR mode
OFF
VCD
without PBC function
OFF
VCD
EN
Advertisement
Table of Contents
