Audio Setup Setting - Sharp DV-720S Operation Manual

Setup

AUDIO SETUP Setting

COMPRESSION ............ Use this setting for increasing the average
DIGITAL/MPEG ...... Use these settings for specifying the type of
Setting the COMPRESSION
(Dolby Digital output level)
When Dolby Digital is used to record the audio on a DVD, the average
overall volume level of the audio is relatively lower than that produced
by a VIDEO CD/Audio CD. This is to provide the widest possible
dynamic range. To counteract this, your Player automatically raises the
overall average volume level of a disc recorded using Dolby Digital to a
level that is similar to that of a VIDEO CD/Audio CD.
DVDs
Dolby Digital audio
VIDEO CDs
Audio CDs
• OFF .............. Audio level recorded on disc is played back without
modification.
• ON ............... Dolby Digital average audio level is increased so it
sounds similar to that of a VIDEO CD/Audio CD.
1
Press SETUP to display the SETUP screen.
2
Use ' or " to select the "
AUDIO SETUP
30
GB
volume of Dolby Digital audio when playing a
DVD.
digital output when playing a disc recorded
using Dolby Digital/MPEG Audio.
COMPRESSION:
OFF
• Audio level the same
• Low audio level
AUDIO SETUP".
COMPRESSION: OFF
DIGITAL: BITSTREAM
MPEG: BITSTREAM
COMPRESSION:
ON
as Audio CD, etc.
ON
OPEN/
OPERATE
SETUP SCREEN CLOSE
VIRTUAL ZOOM
DISPLAY DIMMER
FUNCTION
SUBTITLE ANGLE AUDIO
CONTROL
TITLE MENU
RETURN ENTER
REPEAT
A B REPEAT
PROGRAM
CLEAR MEMORY DIRECT
C M
REV FWD
PLAY
RESUME STILL PAUSE
STOP
SLOW F.ADV SLOW
SKIP SKIP
DVD VIDEO PLAYER