Connection; Connecting A Tv With Av 1 (Tv) Output And Av 2 Input Scarts - Sharp DV-720S Operation Manual

Connection

Caution:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable (supplied for
Middle East only).
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the
Player, because it may cause electrical interference when you are watching television programs.

Connecting a TV with AV 1 (TV) Output and AV 2 Input SCARTS

Use the SCART cables (one SCART cable: supplied for Europe only) to connect the Player to your TV and VCR.
: Signal flow
Required cables
SCART cable (one SCART
cable: supplied for Europe only)
SCART cable (the other SCART
cable: commercially available)
Position the OUTPUT SELECTOR to "VIDEO" when connecting the Player to a TV which does not support
S-VIDEO and/or RGB signal. The factory default setting is "VIDEO".
To AV 1 (TV)
SCART
AV 1 ( TV )
OUTPUT S-VIDEO
AV 2
SELECTOR OUT
S-VIDEO
RGB VIDEO
Change the position according to
the signal type (VIDEO/S-VIDEO/
RGB) that is output to TV.
To AV 2
SCART
To SCART
input
DVD Player
VIDEO
OUT
DIGITAL OPTICAL
L
OUT
DIGITAL OUT
AUDIO
OUT
R
SCART OUTPUT
To SCART
output
VCR
TV
15
GB