Table of Contents
Advertisement
E11
CONNECTIONS
Connecting to video equipment
Enjoy playback from a video disc player, VCR or other video equipment by connecting them to
this TV set using the Audio/Video in terminals.
Example use of front terminals
TV
MENU/
VIDEO
AUDIO
POWER
PRESET
CH
AV-2 IN
(21J1-RU)
Bottom
Example use of rear terminals
For Playback
DVD Player
To Audio/
Video out
terminals
To Audio/
Video out
terminals
VCR
• The audiovisual cords required to connect the TV set with video equipment may differ from those shown in the above
diagram. See the operation manual of your video equipment for connection details.
• The above recording and editing connections are for intended solely personal use and not for the illegal copying of
audiovisual material protected by copyright laws.
Camcorder
Video Game
To Audio/Video
out terminals
Yellow : To VIDEO
White : To AUDIO
TV
Yellow : To VIDEO
White : To AUDIO
For Recording and Editing
AV-1 IN
OUT
AUDIO
CAUTION : DANGEROUS
VOLTAGE INSIDE
VIDEO
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
E12
The following problems do not always indicate a hardware failure. Therefore, please use the
troubleshooting guide below before calling for repair service.
If, after following the guide none of the remedies work, unplug the TV set and call for service.
VCR
Quick
Service
Check List
Possible Causes/Remedies
Try a new channel to check for possible station
trouble.
TV not plugged in.
Outlet power OFF.
POWER switch of TV not ON.
Antenna not connected to terminal at the back
of the TV set.
If outside antenna is used, check for broken
VCR
wires.
Check for local interference.
To Audio/
Turn OFF using the
Video in
then turn ON again after a minute.
terminals
Adjust COLOUR control.
Check batteries in the remote control.
Try fine tuning to correct.
Contrast setting in picture mode might be all
the way to the minus side. Press the
NORMAL button on the remote control to
correct.
Increase the volume.
This unit is equipped with a microprocessor. Its performance could be adversely affected by external
electrical noise or interference. If this should happen, unplug the unit and plug it in again after a few
minutes.
TROUBLESHOOTING
POWER switch,
Advertisement
Table of Contents
