Table of Contents
Advertisement
E2
ACCESSORIES
The following accessories are included with this television.
Remote Control
Size-AA batteries
E3
BEFORE OPERATING TELEVISION
Connecting to an antenna
300-ohm
75-ohm
twin-lead
impedance
flat feeder
converter
(not supplied)
(not supplied)
75-ohm
coaxial cable
AV-1 IN
OUT
CAUTION : DANGEROUS
VOLTAGE INSIDE
(round cable)
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
(not supplied)
Antenna in
Standard DIN45325
plug (IEC169-2)
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug (IEC 169-2),
plug it into the antenna jack at the rear of the set.
Rod antenna connection
Rod Antenna
Antenna
mounting socket
Feeder
Impedance
CAUTION : DANGEROUS
AV-1 IN
OUT
VOLTAGE INSIDE
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
AUDIO
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
VIDEO
Converter
Antenna jack
(14J1-RU)
• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.
• If you are using a rod antenna and the signal from TV station is weak or not clear, the picture may not display clearly
or properly. In this case, we recommend that you use an outdoor antenna.
Rod antenna (dipole)
with ribbon feeder
Operation manual
300-75 impedance converter
Connecting to an antenna via a VCR
TV
VCR
AUDIO
VIDEO
To RF out
terminal
To antenna
in terminal
If your outdoor antenna uses a 300-ohm twin-lead
flat feeder, connect a 300-ohm to 75-ohm
impedance converter and plug it into the antenna
jack at the rear of the set.
(1) Insert the rod antenna's base post into the
antenna mounting socket until it clicks into
position.
(2) Connect the feeder to the impedance converter.
(3) Plug the impedance converter into the antenna
jack at the rear of the set.
• Rod antenna and impedance converter are only
included in model 14J1-RU.
E4
TV set
(only for 14J1-RU)
This operation manual is for
14J1-RU
and
illustration of 21J1-RU is used in
this operation manual.
TV
Bottom
AV-1 IN
OUT
AUDIO
CAUTION : DANGEROUS
VOLTAGE INSIDE
VIDEO
TO PREVENT ELECTRIC SHOCK.
DO NOT REMOVE COVER.
NO UBER-SERVICEABLE PARTS
INSIDE, REFER SERVICING TO
QUALIFIED SERVICE PERSONAL.
POWER switch
Turns on and off the
main power.
Antenna in
Power can be turned on by the
remote control when the indicator
Infrared sensor window
Receives the infrared wave from
Using headphone
Insert headphone plug into headphone jack to listen to audio with
headphone.
• The audio from the speaker is turned off.
• To avoid injuring your hearing, do not put on the headphone before plugging them into the headphone jack and before
the power is turned on.
PART NAMES
21J1-RU.
The
MENU/
VIDEO
AUDIO
POWER
PRESET
CH
AV-2 IN
POWER
Power indicator
is dimly.
the remote control.
MENU/PRESET
MENU/PRESET button
Tunes the channels.
Used for MENU setup.
Volume up/down buttons
Adjusts the volume.
Makes adjustments in PRESET.
(21J1-RU)
CH
Headphone jack
Use to listen to the audio
with headphone.
Audio input terminal (AV-2 IN)
Connects to a camcorder,
video game, etc.
Video input terminal (AV-2 IN)
Connects to a camcorder,
video game, etc.
/
CH
CH
Channel up/down buttons
Selects the channels.
Tunes or sets the channels.
/
[ TV set (Bottom) ]
Advertisement
Table of Contents
