To Load A Disc Into The Player - Sharp DV-L88W Operation Manual

6 Load the disc and start play.
After confirming that the disc is compatible, you can load it into the Player and
play it.

To load a disc into the Player

1
Press îOPEN to open the disc compartment cover.
• The disc compartment cover moves within a range of 0 to 60 degrees.
Never try to force the cover to move outside this range. Doing so can
damage the cover.
2
Gently press down on the disc in the
vicinity of the centre hole so it seats
properly into place.
• You should be able to hear and feel the
disc seat securely into place when you
press down on it.
• Make sure the label of the disc is facing up
when you load it into the Player.
3
Close the disc compartment cover and
press down at the corner marked "PUSH
TO CLOSE" so it locks securely into place.
Important!
• Make sure the disc seats securely when you load it into the Player. An
improperly seated disc can result in damage to the disc and malfunction of
the Player.
• The indicator
if you load the disc upside-down, or if the region number of the disc you are
using is one that is not supported by this Player. If the above indicator appears,
remove the disc from the Player and take the proper corrective action.
appears on the display if the disc you are using is damaged,
Quick Start Guide
21
GB