Table of Contents
Advertisement
Troubleshooting
Problem
No image from
the Player
appears on the
screen of a
connected
device.
The volume of
Dolby Digital
audio from a
DVD is too low.
The battery
pack does not
charge.
Power does
not turn on.
Indicator lamp
does not light
(battery pack
does not
charge).
108
GB
Recommended Action
• Make sure the channel of the connected TV is
set to VIDEO or AV.
• Make sure video and audio cables are
connected correctly.
• Change the "COMPRESSION" setting to "ON".
This setting compensates for the relatively low
average volume level of Dolby Digital, which is
used to provide the widest possible dynamic
range.
• Make sure the Player is turned off. The battery
pack does not charge when it is installed in the
Player while Player power is turned on.
• A warm battery takes longer than normal to
charge. Wait until the battery cools to normal
temperature before trying to charge it.
• Replace the battery pack with a charged one or
switch to AC adapter power.
• Charging of a battery pack may become disabled
(and the Indicator lamp may fail to light)
whenever heat from the Player causes the
internal temperature of an installed battery pack
to rise above certain level. When this happens,
remove the battery pack from the Player.
Charging will start automatically when battery
pack internal temperature drops to a safe level.
• Make sure the temperature of the battery pack
is within the allowable temperature range of
10°C to 30°C for charging.
• Check to make sure that the AC adapter DC
cord is connected correctly.
Page
31
56
36-38
104,
105
35-39
–
105
35
Advertisement
Table of Contents
