One-Hour Off Timer; Timer Operation - Sharp Plasmacluster AE-X12JJ Operation Manual

ONE-HOUR OFF TIMER

When the ONE-HOUR OFF TIMER is set, the unit
will a­utoma­tica­lly turn off a­fter one hour.
1
Press the ONE-HOUR OFF TIMER button.
• The remote control displays "
• The orange TIMER lamp (
light up.
• The unit will stop operating after one hour.
DISPLAY
MODE
FAN
TO CANCEL
Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp (
turn off.
Alternatively, turn the unit off by pressing the
ON/OFF button.
• The red OPERATION lamp (
orange TIMER lamp (
off.
NOTE:
• The ONE-HOUR OFF TIMER operation has priority
over TIMER ON and TIMER OFF operations.
• If the ONE-HOUR OFF TIMER is set while the unit
is not operating, the unit will operate for an hour at
the formerly set condition.
• If you wish to operate the unit for another hour
before the ONE-HOUR OFF TIMER is activated,
press the ONE-HOUR OFF TIMER button again
during operation.
• If TIMER ON and/or TIMER OFF are set, TIMER
CANCEL button cancels every setting.
AY-XP9JJ_en.indd 10
".
) on the unit will
1
1h
CLEAN
SET/C CANCEL
) on the unit will
) and the
) on the unit will turn

TIMER OPERATION

TIMER OFF
1
Press the TIMER OFF (
2
The TIMER OFF indicator will blink; press
the TIME ADVANCE or REVERSE button
to set the desired time.
(The time can be set in 0-minute increments.)
3
Point the remote control at the receiver
window on the unit and press the TIMER
SET (SET/C) button.
• The orange TIMER lamp (
light.
• The unit will generate a beep when it receives
the signal.
DISPLAY
MODE
CLEAN
FAN
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF mode is set, the temperature
setting is automatically adjusted to prevent the room
from becoming excessively hot or too cold while you
sleep. (Auto Sleep function) The Auto Sleep function
will not activate during the AUTO mode.
COOL/DRY MODE:
• One hour after the time operation begins, the
temperature setting rises °C higher than the
original temperature setting.
HEAT MODE:
• One hour after the timer operation begins, the
temperature setting drops 3°C lower than the
original temperature setting.
0
) button.
) on the unit will
1h
1
2
3
SET/C
07.6.22 7:50:48 AM