Gain-Up - Sharp ViewCam VL-NZ50S Operation Manual

Gain-up

When you are recording in a dark or poorly
illuminated location, "LIGHT" is displayed on
the screen. Use the gain-up function to record
a brighter picture.
Note:
• At locations where lighting is adequate, "LIGHT"
will not appear. The gain-up function cannot be
used in this case.
GAMMA/BRIGHTER
button
In CAMERA mode, press the GAMMA/
BRIGHTER button once.
• "GAMMA" appears, indicating that the gain-
up function is now working.
L I G H T L I G H T
AU T O AU T O
GAMMA GAMMA
L I G H T L I G H T
AU T O AU T O
To obtain a brighter picture
Press the GAMMA/BRIGHTER button again.
• The e indicator appears.
To cancel the gain-up function
Press the GAMMA/BRIGHTER button until
"GAMMA" disappears.
Notes:
• You may experience some picture noise in Gain-
up mode, which increases when the e
displays.
• When the e indicator displays, you may get
a shadow image behind a subject that is moving
around a lot.
• Fine brightness adjustments are possible when
using manual exposure (see page 38).
• Gain-up will cancel if you aim the camcorder in a
bright location.
3 0 min 3 0 min
3 0 min 3 0 min
GAMMA
AU T O
3 0 min
26